Most homeowners know they should be doing regular maintenance. The hard part is knowing what to do and when. Seasonal checklists help because they break the work into smaller chunks tied to the time of year when each task actually matters.
Spring
Spring is when you deal with whatever winter left behind. Clean gutters, inspect the roof for missing or damaged shingles, and check the exterior for cracks or peeling paint. Test your outdoor faucets for freeze damage. Replace your HVAC filter and schedule an AC tune-up before the heat arrives.
If you have a yard, this is also the time to service your mower, check irrigation systems, and clear any debris from drainage areas.
Summer
Summer is lighter on maintenance but heavier on observation. Check weatherstripping around doors and windows. Clean dryer vents. Test smoke and carbon monoxide detectors. Inspect your deck or patio for signs of wear. If you have a water heater, flush it once a year — summer is a good time for that.
Fall
Fall is about preparing for cold weather. Clean gutters again. Have your furnace inspected. Shut off and drain exterior hose bibs if you live in a freeze-prone area. Check insulation in the attic. Seal any gaps where air or pests could get in.
This is also a good time to test your sump pump if you have one.
Winter
Winter is mostly about monitoring. Keep an eye on ice dams, frozen pipes, and heating performance. Replace your HVAC filter again. Check for drafts. If you have a fireplace, make sure the flue is clear and the damper works.
The pattern
The common thread is that none of these tasks are difficult on their own. The problem is remembering to do them at the right time. That is exactly what Stu is built for — it generates a maintenance schedule based on your home and reminds you when something is due.